a beautiful tie scarf spokes

Products by lighter than knitted scarf is simply no! Indeed, pick up the number of loops for the desired width of the scarf, and then vyazhi in a straight line to the desired length. It's actually easy. Easy, but not simple! Not just a beautiful tie scarf spokes. Why is that? Because beauty - a relative term, and what pleases one person may not cause the same excitement in the other. However, originality is always competition. And no matter how your scarf This original appears: coloring, patterns, knitting techniques, or model of the scarf. The main thing that is unusual, bold (or even boldly!) And beautiful. So let's look at a few options for the original performance of women's hand-knitted scarf.

The first variant. Scarf-helix

 associate beautiful women scarf

Or, as it is called differently: the scarf-wave-boa scarf. The main thing here is not binding pattern, not the kind of yarn and the colors of the finished scarf. Important in a scarf-Boas - the original model and technique. Scarf spiral - this solemnity, pomp, festivity ... He looks like at the same time and exquisite lace jabot, and an air of exotic feather boa and a scarf on (but very original).

How to tie a scarf spiral spokes? We collect the spokes on the twenty-four loops provyazyvaem first row: bead, facial eleven and twelve backstitches. Then knit the pattern of:

  1. first row: one bead, one nakida, one face, one nakida eight facial, one shot in the wrong to the right needle, stretch the thread forth between the spokes removed loop return to left needle, stretch the thread back and forth between the spokes (loop turns wrapped thread) , turn work provyazyvaem twelve backstitches loops;
  2. second row: bead, one nakida three facial, one nakida six facial, one shot in the wrong to the right needle, stretch the thread forward between the spokes, return loop on the left needle, stretch the thread back and forth between the spokes, turn work provyazyvaem twelve backstitches loops ;
  3. third row: bead, two along the front, one front, two with the front four face, a shot in the wrong to the right needle, stretch the thread forward between the spokes, return loop on the left needle, stretch the thread back and forth between the spokes, turn the work, eight backstitches ;
  4. fourth row: a bead, with the front three, four facial, * wrapped loop and pull out the bottom provyazyvaem with the next front, one front * (from * to * repeat three times), the work does not flip, loop provyazyvaem Wrong.

Knit Scarf to length units of the four series. The color and quality of yarn - at your discretion.

Option Two. Baktus scarf (shawl with long ends)

 how to tie a beautiful scarf

Baktusom called scarf-scarf connected to the spokes or the hook. The length of the scarf - from one hundred and thirty centimeters (possible), and the width - not more than forty centimeters. Its originality is evident not only in the model, but also in a variety of ways of draping. Knit scarves or such a simple smooth surface (front or underside) or tracery viscous. Ways performance baktusa and two: vertical and horizontal. The horizontal method is less common, but no less popular. For this gain spokes number of loops along the length of the scarf (130 cm) and knitting it up to an angle (width) gradually diminishing loop to get the shape of a triangle.

To tie a scarf beautiful female baktus vertical way, we collect on the spokes of the four loops and knit scarf up the length by adding a loop (with one hand) in each fourth row. Dovyazav to the top of the scarf (scarves corner), continue knitting, making loops decrease in every fourth row.

For the cold season baktus knit scarf from a warm wool or feather yarn, plain or melange. For summer or fall would be good cotton or silk baktus who is associate openwork pattern.

Option Three. Scarf-collar

 a beautiful tie scarf collar spokes

Or in another way: the scarf-collar, mini-LIC. This option is good because it not only serves as a scarf, and a collar, and (if necessary) of the hood or hat. In addition, it can be an excellent optional accessory even for a business suit (this is how to knit!).

This scarf usually fit around and has no seams. For good draping scarf-collar best knit pattern patent: a simple, English or French band. But it is not a prerequisite. This scarf can be connected and any other pattern, even with braids and knobs. Excellent look Snudy made Scandinavian patterns or knitted from melange yarn, decorated with pom-poms along the bottom edge, or tassels.

In LICs medium size and density will require about one hundred grams of yarn and circular needle. Type in the spokes of about two hundred and forty loop and knit elastic band in a circle of about twenty centimeters. If this is supposed to wear a scarf like collar collar, a hood or hat, its width should be sufficient to drape in the upper chest or to hide their heads.
For example, to tie a scarf, hood with a pattern of wide braid, you need to dial one hundred twenty loops and knit double (two facial, purl two) rubber ten centimeters. Then we should take the size of knitting needles to knit more and wide braids (ten facial) for approximately fifty centimeters. Dovyazav to length close all the loops.

How to tie a scarf beautiful without any frills? Simply choose a beautiful yarn (color or texture). And, you can knit a scarf or a filigree relief pattern or a pattern of yarn in contrasting colors. Believe me, it is often this is enough. Or, on the contrary, give free rein to their imagination. Use the technique of patchwork for your knitted scarf or decorate it with embroidery Rococo volume. Try to tie a scarf or Tunisian crochet technique friform. So, do not shelving them, take up knitting needles and safely implement his plan: and all you get!

 How to tie a beautiful scarf? Easily!

We recommend that read: how to tie spokes socks


More and more often among our interests are beginning to enter the rare species and up to a certain time is not familiar to us handmade art. Among the more unusual types of needlework applies Ganutell - machinery manufacture of artificial flowers.

Where there Ganutell?

Ganutell Motherland - the Mediterranean island of Malta. This is an exclusive needlework was invented in the monasteries of the Mediterranean and is still preserved there in its original form, as the art of making flowers for the church altar. Perhaps Ganutell technique was also known in other lands, but in Malta it is now possible to see the ancient ornaments and flower arrangements that decorate the church.

Despite the plainness of performance church decoration technique Ganutell looks like a work of art, not only during the holidays, but also during the week. It is very difficult, almost jewelry. Perhaps that is why this technique was almost forgotten crafts. Renaissance art Ganutell began quite recently - in the nineties of the 20th century. And no wonder the real Maltese decorations are elegant, easy and amazingly beautiful.

Based on what technology?

The technology is based on the skill of the connection wire filament. Typically, a thin wire with a gold or silver-plated, straight and twisted into spirals and springs. Threads for Ganutell used different colors and textures. Sometimes the decorations in this technique are made only of wire.

Technically manufacturing Ganutell as follows:

  • wire twisted into a spring-loaded;
  • a spring rolled into individual petals;
  • petals braided thread;
  • individual petals are collected in whole flowers.

The shape and size of produced colors are directly dependent on the number of petals, which are connected with each other, and of course, by their shape, color and thickness of the thread and the wire. The petals are made of different schemes and mimic real flowers: daisies, lilies, roses, tulips and so forth. For more luxury color gives small beads, seed beads and sequins, to weave into petals.

As compared with other artificial flowers decoration made in the art, have some advantages. They are lighter than the colors of beads. Stronger than fabric flowers. Durable than a composition of dried flowers. Yes, just look these flowers is elegant and yet exclusive. His appearance resembles Ganutell products atlas. Product performed using several basic techniques and technologies. Excellent combined with many materials. It looks great in clothes (dress) and jewelery (jewelry).

Recently Ganutell is becoming increasingly popular in wedding fashion. In this technique produced an unusually graceful delicate tiaras and crowns for brides, decorations wedding dresses, brooches, earrings and pendants.

 Ganutell Appliances

How to make your own Ganutell?

In fact, to make a decoration on their own, there is nothing particularly complicated! However, it is worth considering that the hard work will require you to perseverance and accuracy.

To produce a simple (training) flower you need a thin, flexible wire (suitable conventional copper), the average thickness of the wire and thread. It is best to look at these products, silk thread, but you can use others, such as floss. To begin with thin copper wire (20-30 cm in length) in a spiral wrap thin (sock) or a thick needle "Gypsy" needle. As a result, you'll have a spiral-spring. Mark the center of the spiral, and remove the wire from the spokes. Then gently pull them to the side so that the spiral turns slightly parted, and between them there were small gaps. The first phase is finished!

Next, insert the spiral into the thicker the wire, creating a framework for the rigid structure of flower petal. Fold the spring-loaded tab in the desired shape and begin to braid his thread. Drum thread to start from the middle of the frame, securing a place in the thread twisting petals and the first turn through the center of the top. Each subsequent round is in the form of eight - from top to bottom, right to left (the principle of working with the yarn is very similar to the principle of izoniti). And the bottom edge of the lobe thread covered with its front side, the top - from the inside. The thread thus has to pass through the gaps between the turns.

Strictly speaking, this is all you need to know for the first experience of the development of technology. The shape of the petals can vary, making them elongated, oval or round, creating a semblance of petals present roses or daisies. In the middle of the flower can be placed beads and beads, and provide it with additional sepals, stems and leaves.

This method of winding thread is not the only, but one of the easiest. Therefore, it is better to use it for the first experience. And only then begin the development of more sophisticated methods of weaving and even inventing their own. Here's a she forgotten, but a resurgent Ganutell technique, graceful art to create incredibly beautiful exclusive jewelry with just a wire and thread.

 Ganutell - machinery Maltese crafts

We recommend that read: Technique Friform